Simulate with complex geometries and complex physics
LIQUID__BC__
definition of physical boundary conditions for LIQUID solver
Required boundary conditions for LIQUID
For all participating geometry items mandatory boundary conditions must be defined depending on the choices for the solver.v--
If the scheme v-- is chosen, then boundary conditions for the velocity and the hydrostatic pressure must be specified by the user (see BC_v and BC_p).vp-
If the scheme vp- is chosen, then boundary conditions for the velocity, the hydrostatic pressure and the dynamic pressure must be given by the user (see BC_v, BC_p and %ind_p_dyn%). The boundary condition for hydrostatic pressure and dynamic pressure must be chosen suitable to each other.Temperature
If temperature is also included in the simulation, then also boundary conditions for the temperature must be defined (see BC_T).Turbulence
If the k-epsilon turbulence model is included, then boundary conditions for k and epsilon must be defined (see BC_k and BC_eps).| List of members: | |
|---|---|
| BC_CNTFORCE | force contact between phases |
| BC_eps | turbulence-epsilon boundary conditions |
| BC_k | turbulence-k boundary conditions |
| BC_p | hydrostatic pressure boundary conditions |
| BC_S | Deviatoric stress tensor boundary conditions |
| BC_T | temperature boundary conditions |
| BC_TearOffCriterion | establish a tear-off criterion for release from walls |
| BC_v | velocity boundary conditions |
| BC_WettingAngle | define the contact angle between free surface |
| BCON | general setting of boundary conditions |
| BCON_CNTCT | general setting of contact boundary conditions |