common_variables

input file for development and debugging purposes

The file common_variables.dat (CV) contains mostly numerical parameters that are used for development and debugging. Currently, efforts are made to reduce the number of mandatory parameters to a minimum (aim is none).

Note:
  • Some CV-parameters can also be set in USER_common_variables (UCV). The UCV-definition is dominant and overwrites the CV-definition (see warnings file in the simulation folder). The Ucv parameters can be found here.

  • Some CV-parameters can be set chamberwise, which can be necessary for multi-phase simulations. If such a parameter is not set for specific chambers, it is automatically set according to the non-chamberwise definition for all chambers.

List of members:
additionalPoint_approximation (experimental) in EULERIMPL and EULEREXPL setting
AdvancedFreeSurfaceAtTimeStep advanced checking of free surface point (Delaunay based) starting at which time cycle
AMFPMJ_CommonAdministrationDirectory define a directory that MESHFREE uses for synchronization of multiple MESHFREE jobs
APPROXIMATENEWPOINTS_HowToApproximateKEPS
APPROXIMATENEWPOINTS_SeparateInteriorAndBoundaryPoints
APPROXIMATENEWPOINTS_SeparateInteriorBoundary
BCGSL_ell
BE_CleanUp_STL choose whether and when to clean up STL geometries
BE_SmoothLength_RefreshAfterHowManyCycles refresh the SMOOTH_LENGTH helper arrays after this many time cycles
BEmap_DefaultValue Default value of BE_MAP (CV)
BEmap_MPIcomm_Version MPI communication version of BE_MAP (CV)
BEmap_PointFilter_Version Point filter version of BE_MAP (CV)
BEmon_MPIcomm_Version MPI communication version of BE_MONITOR_ITEM (CV)
BETA_FOR_LIMITER parameter for controlling the Sweby limiter
BND_alpha
BND_beta
BND_gamma
BND_SearchTreeAdministration_NbTimeStepsUntilFirstSkip skip the construction of the boundary element search tree after this many time cycles
BND_SearchTreeAdministration_RefreshTreeAfterHowManyCycles refresh the boundary element search tree after this many time cycles
BUBBLE_DoTheManagement (chamberwise) switch regarding bubble analysis (CV)
BUBBLE_EdgeValue (experimental) edge value limit for the detection of open edges
BUBBLE_EnforceAveragePressure fix average pressure for all bubbles (CV)
BUBBLE_fac_pHydrostatic (experimental) numerical relaxation parameter for pHydrostatic in case of bubbles
BUBBLE_pOffset define offset pressure for bubble pressure-on-volume analysis (CV)
BUBBLE_UseTopologyConstraint (chamberwise) parameter to use topology analysis for bubble-volume computation
CLUSTER_Size
CoarsenGeometry
COEFF_Abaqus_H factor for Abaqus mesh interpolation
COEFF_dt (chamberwise) factor for computation of time step size (CV)
COEFF_dt_coll time step criterion from interaction model (DROPLETPHASE only) (CV)
COEFF_dt_d30 time step criterion depending on %ind_d30% (DROPLETPHASE only) (CV)
COEFF_dt_Darcy define the virtual time step size for applications with Darcy (Brinkman) term (CV)
COEFF_dt_free (experimental) factor for exaggerated movement of the free surface (CV)
COEFF_dt_SurfaceTension_A time step criterion for surface tension, parameter A (CV)
COEFF_dt_SurfaceTension_B time step criterion for surface tension, parameter B (CV)
COEFF_dt_SurfaceTension_C (experimental) time step criterion for surface tension, parameter C (CV)
COEFF_dt_virt (chamberwise) scaling factor for the virtual time step size (CV)
COEFF_Iopp_Repair
COEFF_mue scaling factor for numerical viscosity (CV)
COEFF_p_divV factor to switch on and control the p*div(v) term in temperature equation
COEFF_penalty
COMP_AddBoundaryParticles boundary point addition settings: how often to fill and how many refill cycle loops to do each time
COMP_AddInteriorParticles interior point addition settings: how often to fill and how many refill cycle loops to do each time
COMP_AdjustEtaEff invoke more stability by controlling the total viscosity
COMP_CheckConservationDuringOrganization
COMP_CosEdgeAngle (chamberwise) parameter to identify edges in geometry (CV)
COMP_CosOpenEdge specify how the boundary continues at an open edge
COMP_DeflationLevel
COMP_DoOrganizeOnlyAfterHowManyCycles do the point cloud organization only after how many time cycles (CV)
COMP_DoOrganizePointsUntil do the organization only until a certain amount of time steps
COMP_DropletphaseSubcycles switch for subcycling in DROPLETPHASE (CV)
COMP_DropletphaseWithDisturbance disturbance for DROPLETPHASE (CV)
COMP_dt_indep parameter to switch on independent time stepping for two-phase LIQUID simulations with v-- and vp- (CV)
COMP_EtaGrad_Version define the way of numerically modeling the property-times-gradient operator
COMP_evoid
COMP_facSmooth_Eta parameter for weight kernel definition for smoothing of viscosity (CV)
COMP_FastBoundaryRefill
COMP_FillEdges fill additional points to the edges of an inflow area
COMP_GradtEtaGrad_Version define the way of numerically modeling the diffusion operator
COMP_HydrostaticPressure
COMP_IsolatedParticles_MinNbOfInteriorNeigh (chamberwise) parameter for the minimum number of interior neighbors a points should have
COMP_IsolatedParticles_MinNbOfNeigh (chamberwise) parameter for the minimum number of (total) neighbors a points should have
COMP_MaxSubCycle
COMP_MinSubCycle
COMP_nbSmooth_Darcy
COMP_nbSmooth_Eta number of smoothing cycles for effective and total viscosity (CV)
COMP_nbSmooth_pCorr smooth heat conductivity
COMP_OppositePoints_NoFreeSurface
COMP_RandomizedFilling
COMP_ReduceSn
COMP_refineGeometry_MaxCycles Maximum number of refinement cycles in refineGeometry{
COMP_RemeshBoundary parameter to control remeshing of IGES-files (CV)
COMP_RemoveBoundaryParticles boundary point removal settings
COMP_RemoveInteriorParticles interior point removal settings
COMP_SharedMemoryForBE turn on use of MPI shared memory for boundary geometry if available
COMP_SharedMemoryForGT2 turn on use of MPI shared memory for GEOTREE2 if available
COMP_SkipHighVelocities for how many consecutive cycles a corrupt solution of velocity is accepted, before MESHFREE stops
COMP_SortBEintoBoxes_Version version how to organize/prepare boundary elements for efficient computation
COMP_StressRelaxAtFreeAndSlipSurface
COMP_TimeCheck switch on time measurements for the main tasks of MESHFREE
COMP_TypeSmooth_Eta type for smoothing of viscosity (CV)
COMP_TypeSmooth_Rho type for smoothing of density (CV)
COMP_WettingAngleVariante How to incorporate the contact angle between free surface and wall
COMP_WettingAngleWeight
CompDistToBoundary_Acc threshold of distance until which the distance to different BE is treated as equal
CompDistToBoundary_EffectiveSearchRadius
compute_FS (chamberwise) switch to compute free surfaces (CV)
compute_LAYER (experimental) influence to Neighbor Filtering over Layers
compute_phase_boundary (obsolete) invoke detection of interface connections (CV)
CONTROL_DirectTesting Instead of launching the computation, MESHFREE goes into a separate testing branch for different tasks
CONTROL_DirectTesting_Param1 additional parameter for the testing environment
CONTROL_DirectTesting_Param2 additional parameter for the testing environment
CONTROL_DirectTesting_Param3 additional parameter for the testing environment
CONTROL_StopAfterReadingGeometry stops the MESHFREE program after geometry is read (CV)
CONTROL_writeUcvLines write out the Ucv-lines read during startup (debugging feature)
correct_CONS
correction_pressure
damping_p_corr (chamberwise) parameter to reduce the dynamic pressure as initial guess for the next time level (CV)
Darcy_PrimaryDirection
Darcy_PrimaryDirectionFactor
DEBUG_Check_CCOR generate control writeout for correction pressure
DEBUG_Check_PDYN generate control writeout for dynamic pressure
DEBUG_Check_PHYD generate control writeout for hydrostatic pressure
DEBUG_Check_VELO generate control writeout for velocity
DEBUG_DefaultRescue
DEBUG_GeneralParameter General list of debug parameters at the developers disposal
DEBUG_SHM_MPIwindow GASDYN parameter for FPM2
DEL_rel_dist_shuffle
delaunay_reduction switch for Delaunay reduction procedure
delta_uw
delta_uw_bp
DIFFOP_ConsistentGradient consistent gradient in the sense d/dn = n*grad (CV)
DIFFOP_gradient type of least squares approximation stencils for gradients
DIFFOP_kernel_Gradient (chamberwise) factor for the weight kernel for the least squares approximation stencils for gradients (CV)
DIFFOP_kernel_Laplace (chamberwise) factor for the weight kernel for the least squares approximation stencils for the Laplacian (CV)
DIFFOP_kernel_Neumann (chamberwise) factor for the weight kernel for the least squares approximation stencils for Neumann operators (CV)
DIFFOP_kernel_Transport (chamberwise) factor for the weight kernel for the least squares approximation stencils for the transport operators (CV)
DIFFOP_laplace type of least squares approximation stencils for the Laplacian (CV)
DIFFOP_Neumann_ExcludeBND (chamberwise) parameter to exclude boundary points from the neighborhood for the computation of the Neumann operators (CV)
DIFFOP_PPI_Gradient
DIFFOP_PPI_Laplace
DIFFOP_PPI_Neumann
DIFFOP_Version version of least squares operators
DIFFOP_WeightReductionInCaseOfDeactivation (chamberwise) parameter to reduce the weight of a neighbor point in case of deactivation (CV)
dist_aip initial relative distance to boundary of a newly injected MESHFREE point (aip = add injected points)
dist_between_phases
dist_FS_from_BND define hole size for the free surface detection
dist_FS_new_part
dist_LayerThickness minimal thickness for degenerated 3D phase
dist_merge_opp_face
dist_rab relative allowed minimum distance of MESHFREE points to boundary (rab = remove at boundary)
dist_rip relative allowed minimum distance between MESHFREE points (rip = remove interior points)
DP_UseOnlyRepulsiveContactForce switch regarding attractive forces in spring-damper model (CV)
DROPLETPHASE_DROPLETPHASE_MaxEquivalentParcelDiameter Limiting maximum equivalent parcel diameter for parceling in DROPLETPHASE (CV)
DROPLETPHASE_DROPLETPHASE_MaxNeighboursForDeParceling Limiting number of neigbors to trigger declustering in DROPLETPHASE (CV)
DROPLETPHASE_DROPLETPHASE_MaxRelativeParcelVelocity Limiting maximum relative parcel velocity for parceling in DROPLETPHASE (CV)
DROPLETPHASE_DROPLETPHASE_MinNeighboursForParceling Limiting number of neigbors to trigger declustering in DROPLETPHASE (CV)
DROPLETPHASE_SubcyclingMPICommunication switch for MPI communication within each cycle of subcycling in DROPLETPHASE (CV)
DROPLETPHASE_SubcyclingReadGravity switch for updating gravity within each cycle of subcycling in DROPLETPHASE (CV)
ELASTOPLASTIC_FadeOut_divS_gradP
EPS_global
eps_p precision in the breaking criterion for the linear systems of pressure (CV)
eps_phyd precision in the breaking criterion for the linear systems of hydrostatic pressure (CV)
eps_T precision in the breaking criterion for the linear systems of temperature (CV)
eps_v precision in the breaking criterion for the linear systems of velocity (CV)
FLIQUID_AssignPenalties_EpsilonP vp- coupled linear system: lower bound for ratio between pressure and velocity entries, PRESSURE EQUATION
FLIQUID_AssignPenalties_EpsilonV vp- coupled linear system: upper bound for ratio between velocity and pressure entries, VELOCITY EQUATION
FLIQUID_ConsistentPressure_CoeffJOKER TEMPORARY: factor to study consistent pressure version 2
FLIQUID_ConsistentPressure_CoeffMM TEMPORARY: factor to study consistent pressure version 2
FLIQUID_ConsistentPressure_CoeffNN TEMPORARY: factor to study consistent pressure version 2
FLIQUID_ConsistentPressure_CoeffTT TEMPORARY: factor to study consistent pressure version 2
FLIQUID_ConsistentPressure_CoeffWEIGHT TEMPORARY: factor to study consistent pressure version 2
FLIQUID_ConsistentPressure_UseDivV (chamberwise) parameter to use numerical approximations of div(v) in direct computation of dynamic pressure (i.e. consistent pressure)
FLIQUID_ConsistentPressure_Version version how to compute the consistent pressure (CV)
FOFTLIQUID_AdditionalCorrectionLoops additional velocity correction loops (CV)
FPM_LICENSE_FILE overwrite the environment variable
GASDYN_CorrectEnergy correct total energy in GASDYN application
GASDYN_CorrectMass correct mass in GASDYN application
GASDYN_FPM2_alpha GASDYN parameter for FPM2
GASDYN_FPM2_beta GASDYN parameter for FPM2
GASDYN_p_gain limit the pressure gain in GASDYN-applications
GASDYN_p_loss limit the pressure drop in GASDYN-applications
GASDYN_r_gain limit the density gain in GASDYN-applications
GASDYN_r_loss limit the density drop in GASDYN-applications
GASDYN_T_gain limit the temperature gain in GASDYN-applications
GASDYN_T_loss limit the temperature drop in GASDYN-applications
GASDYN_Upwind2ndOrder DEPRECATED!!! (GASDYN parameter for FPM1)
GASDYN_Upwind_Lbeta (chamberwise) GASDYN parameter for FPM1 and FPM3
GASDYN_Upwind_Lgamma (chamberwise) GASDYN parameter for FPM1 and FPM3
GASDYN_UpwindOffset (chamberwise) GASDYN parameter for FPM1
GASDYN_Version (chamberwise) GASDYN parameter to choose FPM1 or FPM2
GEOTREE2_BND_FinalBoxDimension relative size extent of GEOTREE2 leaves
GEOTREE2_BND_FinalBoxSize number of triangles in a GEOTREE2 leaf
GEOTREE2_EstablishCON_Version parameter for the bintree-search of the neighborhood of MESHFREE points
GEOTREE2_FinalBoxSize parameter for the bintree-search of the neighborhood of MESHFREE points
GEOTREE2_IntListMargin parameter for the bintree-search of the neighborhood of MESHFREE points
GEOTREE2_MaximumBoxSize parameter for the bintree-search of the neighborhood of MESHFREE points
GEOTREE2_SizeOfSearchBox parameter for the bintree-search of the neighborhood of MESHFREE points
GLOBAL_eps_mass
GLOBAL_eps_momentum
GLOBAL_N_iterations
iFPM_process_ID give a maximum 16-digit MESHFREE process ID
IGES_Accuracy relative accuracy for consistency checks of IGES-faces (CV)
IGES_HealCorruptFaces allow a certain depth of healing triangulation of IGES faces by refinement (CV)
int_BND_part_add boundary point addition interval
int_BND_part_remove boundary point removal interval
int_part_add interior point addition interval
int_part_cross_BND
int_part_remove interior point removal interval
int_part_smooth
INTEGRATION_ReopenTimestpFilesAfterHowManyCycles *.timestep-Files close and reopen again after how many cycles (debug reasons)
IS_GPU
ISOLATEDPOINTS_ClusterOnResultingVolume threshold to cluster two isolated points into one
ISOLATEDPOINTS_ProduceVolumePackage threshold to turn isolated points into volume packages
ITERATION_EstimatedFutureStressTensor
ITERATION_evoid
ITWMESI_PressureMapping_Filter coupling ITWMESI filter for mapping the pressure solution to the boundary elements
ITWMESI_PressureMapping_WeightPdyn coupling ITWMESI weight for mapping dynamic pressure
ITWMESI_PressureMapping_WeightPhyd coupling ITWMESI weight for mapping hydrostatic pressure
ITWMESI_ShearForceMapping_BasedOnStresses coupling ITWMESI: decide whether the shear forces be projected as stress values (N/m^2) or as forces (N)
ITWMESI_ShearForceMapping_Filter coupling ITWMESI filter for mapping the shear force solution to the VPS boundary elements
ITWMESI_ShearForceMapping_Weight coupling ITWMESI weight for mapping the shear forces
LIMITER slope limiter for controlling numerical diffusion in MUSCL-reconstruction scheme in EULERIMPL and EULEREXPL setting
LINEQN_scaling choose the way how to scale/normalize the linear systems (CV)
LINEQN_solver linear solver to be used for the coupled vp- or v-- system (CV)
LINEQN_solver_ScalarSystems linear solver to be used for the scalar systems like pressure, temperature, etc. (CV)
MASS_correction_DivergenceVelocity Mass Correction for weakly compressible flow problems
max_N_stencil maximum number of neighbor points accepted for stencil computation and numerics (CV)
max_N_stencil_INTERIOR max. number of neighbors accepted for stencil computation and numerics only for interior points
MaximumNumberOfPointsDuringComputation
MEMORIZE_ResetReadFlag reset frequency for MEMORIZE_Read flag (CV)
MESHFREE_LICENSE_FILE overwrite the environment variable
MPI_AllreduceMaxNbPackages Maximum Number of packages created per MPI Allreduce operation
MPI_AllreducePackageSize Package Size of MPI Allreduce operations
MPI_CommunicationMethod
MPI_ExcludeDirectionFromBisection
MPI_WeightingMethodForBisection how to give weights to points for the MPI-bisection process
N_addvar definition of the number of %ind_addvar% to be used (legacy code)
Nb_InflowLayers Nb_InflowLayers
NB_OF_ACCEPTED_REPETITIONS number of permitted repetitions of substep in EULERIMPL setting
NB_POINTS_BC_HEAT_EQUATION_1D number of points for 1D heat equation for temperature boundary condition
NEIGHBOR_FilterMethod choose how to exclude neighbors from MESHFREE points at critical geometry parts
nue Spatial dimension of problem (default=3)
OBJ_ConvertQuadToTria convert quads into triangles upon read-in
OPTIMIZATION_InitialGuessOfVi_Fast
ord_eval define approximation order for refill points (CV)
ord_gradient (chamberwise) approximation order of the gradient operators (CV)
ord_laplace define approximation order of the Laplace operators (CV)
ORGANIZE_ActivateBNDpoints_Version version for the boundary point activation
ORGANIZE_BE_ClusterNodesPoints_Version define version number for clustering of geometry node points after geometry is read in from file (such as stl-files)
ORGANIZE_BringNewPointToFreeSurface define maximum distance a newly created point at the free surface can be moved in order to perfectly fit the free surface
ORGANIZE_CheckAllPointsForFreeSurfaceUntilTimeStep consider all points as candidates for free surface until a given time step
ORGANIZE_CheckFreeSurface_Version define version number for the free-surface-check
ORGANIZE_CheckPointsAtFS_PerformPreCheck invoke additional algorithm in order to find candidates for free surface detection
ORGANIZE_DeveloperCheck_Version version of the debugging routine ORGANIZE_DeveloperCheck
ORGANIZE_DistanceToBoundary_Version define version number for distance-to-boundary computations
ORGANIZE_ForceInsideCheckForAllParticles inside-check for all MESHFREE points
ORGANIZE_ForceInsideCheckForNewParticles inside-check for new MESHFREE points
ORGANIZE_ForceTouchCheckAtWalls touch-check for MESHFREE points at walls
ORGANIZE_FuzzyMPIFilling (chamberwise) parameter to allow MPI processes to fill points outside their own domain
ORGANIZE_OppositePoints_Version define version number for detecting points of the other phase to be coupled (opposite points)
ORGANIZE_PreAllocationSize define version number for distance-to-boundary computations
ORGANIZE_PSTOneReductionStep_Version version how to reduce MESHFREE points if they come to close to each other
ORGANIZE_PSTOneRefillStep3_UseFromWhichTime use the new implementation of PST_OneRefillStep_3 from which time
ORGANIZE_PSTOneRefillStep3_UseFromWhichTimeStep use the new implementation of PST_OneRefillStep_3 from which time step
ORGANIZE_QualityCheck_ListNbOfNeighbors number of neighbors per point for which the quality check has to be performed
ORGANIZE_ReducedFillingOfWalls (chamberwise) parameter for reduced filling of boundaries marked as walls
ORGANIZE_ReducedFillingOfWallsIgnoreNofillForStartup Switch for initializing walls with %ACTIVE_nofill% with BE points
ORGANIZE_RefillOnlyForActiveBoundaryParticles (chamberwise) parameter to trigger the point refilling procedure along the boundary only for active boundary points
ORGANIZE_ToleranceForGapAnalysisOfRegularBoundary
ORGANIZE_USER_update_boundary_particles_Version version of USER_update_boundary_particles.f90 to be used
pBubble_Offset define offset pressure for bubble pressure-on-volume analysis
PHASE_distinction invoke detection of interface connections (CV)
PointDsplMethod (experimental) Choice among different ways to move points in Lagrangian framework (CV)
prec_seek_holes number of test points created for hole search
pure_TRANSPORT (experimental) choice of spatial discretization scheme for transport terms in EULERIMPL and EULEREXPL setting
QUICKVIEW_SaveHowOften Interval for writing QUICKVIEW files
QUICKVIEW_VariableList
QUICKVIEW_Version
QUICKVIEW_WhichParticles
radius_hole relative allowed hole size (CV)
rel_dist_bound relative distance of neighboring points at boundaries (CV)
rel_dist_edge relative distance of neighboring points at edges of the geometry
RepairGeometry enforce clustering of geometry nodes upon read-in (CV)
RepresentativeMass_iData (chamberwise) parameter for the RepresentativeMass algorithm (CV)
RESTART_useSTREAMfile use the STREAM inp/output for restart files
restartnewBE_filling (chamberwise) parameter to control filling of new boundary elements upon restart (CV)
restartnewBE_PossibleGeometryIntersection (chamberwise) parameter to control additional checks during filling of new points after restart with new boundary elements (CV)
RIGIDBODY_TimeIntegrationDamping Numerically damping of the time integration
RIGIDBODY_TimeIntegrationPPI Tichonov-regularization parameter for rigid bodies with links or intersections
RIGIDBODY_TimeIntegrationVersion choose time integration version (still experimental)
RIGIDBODY_UseCollisionModel switch on the collision model for rigs bodies (rigid-wall and rigid-rigid)
SAMG_Setupreuse accelerates SAMG solver for quasi-stationary point clouds (CV)
SAVE_ASCII_split splits ASCII output files if larger than 2GB
SAVE_atEndOfTimestep choose to save data for visualization at the end of time steps instead of at the start (CV)
SAVE_PrecisionTimestepFile choose the precision (number of digits) for values in the timestep file (CV)
SAVE_QuickView Interval for writing QUICKVIEW files
SaveRestartOnInit
SCAN_ClustersOfConnectivity (chamberwise) switch on cluster checking of MESHFREE point cloud by neighborhood connectivity (CV)
SIGNAL_LaunchComputationalSteering Switch between the two options of computational steering
SimCut (chamberwise) parameter to stop filling of geometry by MESHFREE points after a certain number of filling cycles (CV)
SimCutBoundary (chamberwise) parameter to stop filling of boundary by MESHFREE points after a certain number of filling cycles (CV)
SkipMarkingPointsLayer2 (experimental) switch for marking the second layer near the boundary in EULERIMPL setting
smooth_BND_movement
smooth_BND_normal
smooth_FS smoothing of free surface
smooth_FS_SurfaceTension
SOLVEV_N_iterations
SPAI_eps
SPAI_first
SPAI_maxentries
SPAI_maxiter
SPAI_precond_method
SPAI_precond_preparation
SPAI_restart
SPAI_smax
SpecialBNDtreatmentEULERIMPL (experimental) switch for special boundary treatment for MUSCL reconstruction in EULERIMPL scheme
SPM_matrix_times_vector_Version version for the matrix-times-vector operations for sparse linear systems
SPM_N_iterations maximum number of iterations in linear system solver
SPM_Regularization_Epsilon adjust numerical parameter epsilon for the matrix regularizations
SPM_Regularization_Type regularization type if all boundaries are Neumann-type
StencilOrderReductionNearBND_forEULERIMPL (experimental) switch for order reduction of x,y,z-derivative stencils in EULERIMPL setting
STRESSTENSOR_NumberSubcycles
STRESSTENSOR_Variante version of stress tensor time integration (CV)
STRESSTENSOR_Variante_Factor factor in stress tensor time integration wrt the shear modulus (CV)
stretch_search
SUBSTEPS_EXPL number of explicit substeps for solving TRANSPORT part in EULEREXPL setting
SUBSTEPS_IMPL number of implicit substeps with constant time step size in EULERIMPL setting
SURFACETENSION_FacSmooth
SURFACETENSION_NbSmooth
SurfaceTesselationActiveBoundary_cRadius radius of the basic disc for the surface tesselation cells on active boundary, including free surface, excluding inactive points
SurfaceTesselationRegularBoundary_cRadius radius of the basic disc for the surface tesselation cells on regular boundary
time_integration_expl order of explicit time integration scheme in EULEREXPL setting
time_integration_impl order of implicit time integration scheme in EULERIMPL setting
time_integration_impl_solve_v order of implicit time integration scheme for velocity only (EULERIMPL)
time_step_gain relative amount by which new timestep size can increase at maximum compared to old timestep size
time_step_loss relative amount by which new timestep size can decrease at maximum compared to old timestep size (adaptive timestep size)
TIMECHECK_Level time check only up to a given level
TimestepFile_HeaderType parameter determines if header of INTEGRATION statements is stored in first line of .timestep files or in separate .timestep.header files (CV)
TOL_keps (control of time step size) error tolerance for computing the k-epsilon model using SDIRK2 method in EULERIMPL setting
TOL_T (control of time step size) error tolerance for computing the temperature using SDIRK2 method in EULERIMPL setting
TOL_v (control of time step size) error tolerance for computing the velocity using SDIRK2 method in EULERIMPL setting
TRANSPORT_ODE_fct_evaluation (experimental) switch for additional function evaluation within the implicit time integration scheme in EULERIMPL setting
turn_down_BND_order (chamberwise) parameter to automatically reduce the approximation order of a boundary point
use_BubbleManagement (chamberwise) switch regarding bubble analysis
USER_curve_interpol_cache turn on caching in USER_curve_interpol_3
V00_SmoothDivV Chorin projection: smooth the local values of div(v) before going into the correction pressure computation (CV)
VOLUME_correction (chamberwise) parameter to correct volume by GLOBALLY adjusting the divergence of velocity term (CV)
VOLUME_correction_FreeSurface (chamberwise) parameter to correct volume by tiny global lifting of the free surface (CV)
VOLUME_correction_local (chamberwise) parameter to correct volume by LOCALLY adjusting the divergence of velocity term due to representative mass balance (CV)
VOLUME_correction_ResetOnRestart (experimental) resets the volume correction quantities of each chamber to the current values
VP0_VelocityCorrection invoke velocity correction based on correction pressure (%ind_c%) for vp- solver (CV)
WallLayer Turbulent wall layer thickness
WARNINGS_BND_Integrate flag controlling the warnings in BND_Integrate
WARNINGS_USER_parse_IsConditionStringFulfilledByBE flag controlling the warnings in USER_parse_IsConditionStringFulfilledByBE
WARNINGS_USER_parse_IsConditionSubstringFulfilledByBE flag controlling the warnings in USER_parse_IsConditionSubstringFulfilledByBE
WhichIndexingMethod
WRITEOUTPUT_Level_Organize